One week of flying

After one week of flying the new copters we have to say that they are preforming very well. We’ve done a lot of crashes but only had one incident with a bent axis on one of the motors which we fixed by replacing the motor.

We have noticed that using some radio channels in combination with some link speeds causes too much packet drops when the motors are powered. It’s almost certainly the PWM that causes ripples on the power supply and that effects the radio transmission. It was by chance we saw this and changing the channel or speed works around the problem.

Currently we are working with Seeedstudio to sort out the details for starting up but we don’t have an estimate for when it will happen yet. But one thing is for sure, we will go with the rapid-prototype mounts for the first DIY kit. We are still working on the details for the molded motor mounts but since there’s a lot of leadtimes for this it would delay the kit with months and we really don’t want that. Since after the summer we have been using the same design for the rapid-prototype motor mounts and we have only had 2 that has broken.

The plan is to package 1 spare motor, 1 spare motor mount and 4 spare propellers with the kit. There will also be extra spare parts available for purchase.

4 comments on “One week of flying

Leave a Reply to Theron Wierenga Cancel reply

Your email address will not be published. Required fields are marked *